Zeige Ergebnisse 101 - 120 von 719
2021
Lilge, S., Nülle, K., Böttcher, G., Spindeldreier, S., & Burgner-Kahrs, J. (2021). Tendon Actuated Continuous Structures in Planar Parallel Robots: A Kinematic Analysis. Journal of Mechanisms and Robotics, 13(1), Artikel 011025. https://doi.org/10.1115/1.4049058
Mattos, L. S., Acemoglu, A., Geraldes, A., Laborai, A., Schoob, A., Tamadazte, B., Davies, B., Wacogne, B., Pieralli, C., Barbalata, C., Caldwell, D. G., Kundrat, D., Pardo, D., Grant, E., Mora, F., Barresi, G., Peretti, G., Ortiz, J., Rabenorosoa, K., ... Penza, V. (2021). μRALP and Beyond: Micro-Technologies and Systems for Robot-Assisted Endoscopic Laser Microsurgery. Frontiers in Robotics and AI, 8, Artikel 664655. https://doi.org/10.3389/frobt.2021.664655
Meisoll, F. J., Jungheim, M., Fast, J. F., Miller, S., & Ptok, M. (2021). Upper Esophageal Sphincter Response to Laryngeal Adductor Reflex Elicitation in Humans. Laryngoscope, 131(6), E1778-E1784. https://doi.org/10.1002/lary.29166
Müller, S. (2021). Ein additiv gefertigtes patientenspezifisches Werkzeugsystem zur Navigation bei der Hüftarthroplastik. [Dissertation, Gottfried Wilhelm Leibniz Universität Hannover]. TEWISS Verlag.
Schappler, M., Job, T.-D., & Ortmaier, T. (2021). A Maple Toolchain for Rigid Body Dynamics of Serial, Hybrid and Parallel Robots. In R. M. Corless, J. Gerhard, & I. S. Kotsireas (Hrsg.), Maple in Mathematics Education and Research - 4th Maple Conference, MC 2020, Revised Selected Papers: Maple in Mathematics Education and Research (S. 350-364). (Communications in Computer and Information Science; Band 1414). Springer, Cham. https://doi.org/10.15488/11141, https://doi.org/10.1007/978-3-030-81698-8_23
Schappler, M., & Ortmaier, T. (2021). Singularity Avoidance of Task-redundant Robots in Pointing Tasks: On Nullspace Projection and Cardan Angles as Orientation Coordinates. In O. Gusikhin, H. Nijmeijer, & K. Madani (Hrsg.), Proceedings of the 18th International Conference on Informatics in Control, Automation and Robotics (Band 1, S. 338-349) https://doi.org/10.5220/0010621103380349
Schell, V., Böttcher-Rebmann, G., Budde, L., Zuniga, M. G., Lenarz, T., & Rau, T. S. (2021). A software for online monitoring of orientation-compensated forces during CI insertion. Current Directions in Biomedical Engineering, 7(2), 97-100. https://doi.org/10.1515/cdbme-2021-2025
Spindeldreier, S. (2021). Modellierung, Synthese und modellbasierte Bewegungsplanung hyperredundanter, binär aktuierter Manipulatoren. [Dissertation, Gottfried Wilhelm Leibniz Universität Hannover]. https://doi.org/10.15488/10346
Stuede, M., Lerche, T., Petersen, M. A., & Spindeldreier, S. (2021). Behavior-Tree-Based Person Search for Symbiotic Autonomous Mobile Robot Tasks. In Proceedings of the 2021 IEEE International Conference on Robotics and Automation (ICRA) (S. 2414-2420). (Proceedings. Robotics and automation). IEEE. https://doi.org/10.1109/ICRA48506.2021.9561608
Stuede, M., Westermann, K., Schappler, M., & Spindeldreier, S. (2021). Sobi: An Interactive Social Service Robot for Long-Term Autonomy in Open Environments. In S. Behnke, E. Menegatti, & C. McCool (Hrsg.), 2021 European Conference on Mobile Robots (ECMR): Proceedings, Virtual Conference 31 August - 3 September 2021 IEEE. https://doi.org/10.1109/ECMR50962.2021.9568838
Tantau, M., Perner, L., & Wielitzka, M. (2021). Distinguishability Analysis for Multiple Mass Models of Servo Systems with Commissioning Sensors. In 2021 European Control Conference, ECC 2021 (S. 2479-2486). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.15488/10570, https://doi.org/10.23919/ECC54610.2021.9654884
Tantau, M., Perner, L., & Wielitzka, M. (2021). Model Selection for Servo Control Systems. International Journal of Mechatronics and Automation, 8(3), 111-125. https://doi.org/10.15488/11498, https://doi.org/10.1504/IJMA.2021.118426
Tantau, M., Morantz, P., & Shore, P. (2021). Position sensor for active magnetic bearing with commercial linear optical encoders. CIRP Annals - Manufacturing Technology, 70(1), 419-422. https://doi.org/10.15488/10978, https://doi.org/10.1016/j.cirp.2021.04.092
Wiegandt, F. C., Biegger, D., Fast, J. F., Matusiak, G., Mazela, J., Ortmaier, T., Doll, T., Dietzel, A., Bohnhorst, B., & Pohlmann, G. (2021). Detection of Breathing Movements of Preterm Neonates by Recording Their Abdominal Movements with a Time-of-Flight Camera. Pharmaceutics, 13(5), Artikel 721. https://doi.org/10.3390/pharmaceutics13050721
Ziaukas, Z., Busch, A., & Wielitzka, M. (2021). Estimation of Vehicle Side-Slip Angle at Varying Road Friction Coefficients Using a Recurrent Artificial Neural Network. In 2021 IEEE Conference on Control Technology and Applications (CCTA) (S. 986-991). (Control Technology and Applications). IEEE. https://doi.org/10.1109/ccta48906.2021.9658710
Zumsande, J., Kortmann, K.-P., Ortmaier, T., & Wielitzka, M. (2021). Estimation of Stochastic Time Lags between Data Sources in Distributed Production Facilities Based on Cross-Correlated Signals. 22th IEEE International Conference On Industrial Technology (ICIT) 2021, Valencia, Spanien. https://ieee-icit2021.org/wp-content/uploads/2021/03/ieee-icit-2021-final-program.pdf
Zumsande, J., Ortmaier, T., & Wielitzka, M. (2021). Vergleich struktureller Totzeitberücksichtigung und kausaler Datenvorverarbeitung bei der datenbasierten Modellierung von Zeitreihen. In Digital‐Fachtagung VDI MECHATRONIK 2021 (S. 80-85). https://doi.org/10.26083/tuprints-00017626
2020
Beilfuss, T., Kortmann, K. P., Wielitzka, M., Hansen, C., & Ortmaier, T. (2020). Real-Time Classification of Road Type and Condition in Passenger Vehicles. IFAC-PapersOnLine, 53(2), 14254-14260. https://doi.org/10.1016/j.ifacol.2020.12.1161
Boyraz, P., Tappe, S., Ortmaier, T., & Raatz, A. (2020). Design of a low-cost tactile robotic sleeve for autonomous endoscopes and catheters. Measurement and Control (United Kingdom), 53(3-4), 613-626. https://doi.org/10.1177/0020294019895303, https://doi.org/10.15488/10555
Budde, L., Hon, N. W. L., Kim, J., Witterick, I., Campisi, P., Chan, Y., Forte, V., Drake, J., & Looi, T. (2020). Development of a Steerable Miniature Instrument to Manage Internal Carotid Artery Injury in Endoscopic Transsphenoidal Surgery Simulation. IEEE Transactions on Medical Robotics and Bionics, 3(1), 281-284. Artikel 9276465. https://doi.org/10.1109/tmrb.2020.3041897